If our Apple TV's or iPad printers are not showing up in their lists then reboot the controller.


First verify that the controllers are listed in our "SAES-Cluster"

  1. Launch Terminal
  2. type:     ssh admin@10.10.2.7
  3. type:     THE PASSWORD IS IN OUR PASSWORD DATABASE UNDER "Aruba controller for Apple TV"
  4. type:     logon 10.1.1.40
  5. type:     show lc-cluster group-membership
  6. ONLY PROCEED IF one of the controllers shows as "L2-Connected"


If controller shows as L2-Connected then proceed as follows:

  1. Open web browser
  2. type:     10.10.2.7
  3. Click SAES-Cluster/Configurations/Tasks/Reboot controllers
  4. Put a check mark in StudentCenter-MC2
  5. Click Reboot Now